Practice test

Georgia Journeyman Electrician Practice Test

Free Georgia journeyman electrician practice test with 20 NEC-based questions. Covers grounding, load calculations, and wiring methods. Instant scoring.

These questions are for study practice only and are not official exam questions.

Question 1

1

In a typical dwelling electrical system, where is the neutral permitted to be bonded to the equipment grounding system?

Question 2

2

Branch-circuit ungrounded conductors are upsized from 12 AWG to 8 AWG to compensate for voltage drop. What happens to the wire-type equipment grounding conductor?

Question 3

3

For a separately derived system such as a transformer secondary, where may the system bonding jumper be installed?

Question 4

4

Which conductor colors or finishes are permitted for an equipment grounding conductor?

Question 5

5

A 240-volt, 30-ampere load is 150 feet from the panel, wired with 10 AWG copper (10,380 circular mils). Using VD = 2 x K x I x L / CM with K = 12.9, what is the approximate voltage drop?

Question 6

6

In dwelling habitable rooms, wall receptacles must be spaced so that no point along the floor line is more than how far from a receptacle outlet?

Question 7

7

What is the minimum length required for a rod-type grounding electrode?

Question 8

8

Who administers the Georgia electrical contractor licensing exam, and what is the minimum passing score?

Question 9

9

Branch-circuit conductors supplying a single continuous-duty motor must have an ampacity of at least what percentage of the motor full-load current?

Question 10

10

What is the minimum size copper equipment grounding conductor for a branch circuit protected by a 60-ampere breaker?

Question 11

11

Which of these dwelling branch circuits is generally NOT required by the NEC to have AFCI protection?

Question 12

12

In a service panel, what does the main bonding jumper connect?

Question 13

13

How much qualifying experience does the Georgia board require for an electrical contractor license, and under whom must it be gained?

Question 14

14

A building has an interior metal water piping system. What does the NEC require with respect to grounding and bonding?

Question 15

15

What is the standard NEC unit load for general lighting in a dwelling?

Question 16

16

How many small-appliance branch circuits does the NEC require for a dwelling kitchen, and at what load is each calculated?

Question 17

17

A 20-ampere branch circuit supplies a continuous load. What is the maximum continuous load current permitted on that circuit?

Question 18

18

Using the NEC demand table for household cooking equipment, what is the demand load for one 12 kW electric range?

Question 19

19

What work is a Georgia Class II (non-restricted) electrical contractor permitted to perform?

Question 20

20

When does a Georgia electrical contractor license expire and require renewal?

Enable JavaScript for the interactive step-by-step quiz with instant scoring and explanations.